| Body material : | Aluminum Alloy+PC cover |
| Power supply: | The solar panel(Monocrystalline 2.5V /120MA) |
| Battery: | Lithium battery 1000MAH*3.2V |
| LED: | Ultra-bright diameter 5mm*6PCS |
| LED Color: | White Green Red Yellow Blue |
| Flashing model: | flashing or constant |
| Working hours: | 140 hrs for flashing modes,40hrs for constant modes |
| Visual distance: | 1000m(approx) |
| Waterproof: | IP68 |
| Load capacity | >30T(can be installed in the middle of the road) |
| Size: | Ф123*45mm |
| Weight： | 30kgs/ctn,30pcs/ctn |
| Life span: | more than 5 years |
| Working Temperature | -20 °C~ + 70°C |
| waterproof | IP68 |
TS30 Flashing LED Edge Lit Sign Our TS30 Flashing Sign conforms to the specifications of the Federal Highway Administration (FHWA) set forth in the Manual on Uniform Traffic Control Devices (MUTCD). Using the latest advances in LED technology, the TS30 employs a set of synchronized high-intensity LEDs to extend the range of visibility of the sign during the day or night.
© Solar Markers Co. All rights reserved. 10211 Pacific Mesa Blvd, Suite 407, San Diego, CA 92121 | T. 1.858.457.9600 | Fax. 1.858.457.9601. SolarMarkers is a leading manufacturer of solar powered L.E.D. raised pavement marker system, also known
LightMark S2X is built for uni-directional or bi-directional lane delineation and is installed at surface-level as opposed to conventional above surface pavement markers. The hologram design of the unit’s illumination surface ensures that the light projects at an elevated angle which is visible at long distances (3,300ft. / 1000m) as if it was installed above surface.
[13] [15] IRWL crosswalks are often supplemented with flashing beacons, LED-enhanced flashing signs, or Rectangular Rapid Flashing Beacons (RRFB). [6] All crosswalk warning lights (i.e. IRWLs and side flashers) must not flash at rate between 5 and 30
8/8/2017 · FDOT officials hope the solar pavement markers being installed will improve safety in the area. The solar reflective pavement markers are small round disks that can emit steady or flashing lights.
NOKIN Traffic is a professional, reliable Road Stud manufacturer,supplier which has been in the field of traffic facility for nearly 20 years. NOKIN road studs are made of active shining LED light source and are fully autonomous over several years.
0.5 - 3 yards (0.5 - 2 meters) The spacing between of each solar studs also according to your actual application requirements, the above values are for reference only. Application: NK-RS-A1 solar road stud light can be used in Urban road,parking lot,Steps, Trucks and other public places,following is some application examples from our clients
SA-SO solar signs (solar flashing beacons) enhance awareness for drivers and pedestrians in school zones, heavy traffic, or accident-prone areas. Available in either amber or red LED lights. SA-SO solar signs are MUTCD compliant and solar-powered. Place in any location with no wiring needed, and they’re completely self-contained, low cost and
Pavement Markers Rock-It Sign Stand Roll Up Signs Safety Apparel Safety Vests Sign Stands Speed Bumps Stop/Slow Paddles Valet/Parking Panels Vertical Panels Worker Safety Work Area Lighting Give us a call at 800-640-1843 or for a quote!
Solar Road Markers Factory Solar Road Pavement Markers CZC Green Waterproof Solar Road Studs Marker Light for Driveway Garden Pavement Deck Dock Pathway Light with Reflector on Sides-10Pack 3.8 out of 5 stars 10 $59.99 $ 59 . 99 Get Price >> Solar
Solar Road Marker - Solar Powered L.E.D. Pavement 10211 Pacific Mesa Blvd, Suite 412, San Diego, CA 92121 | T. 1.858.457.9600 | Fax. 1.858.457.9601. SolarMarkersis a leading manufacturer of solar powered L.E.D. raised pavement marker system, also known as solar road markers, road studs, or reflective lane markers.
High Visibility Plastic catseye road stud Pavement Markers With Double Reflectors Specification: Product Plastic Road Stud Size 105*81*16 Lens Size 22*79mm Color Red,Yellow,White Material ABS /PMMA Lifespan >5 years Reflective Sides Double or Single
Flashing model: flashing or constant Working hours: 140 hrs for flashing modes,40hrs for constant modes Visual distance: 1000m(approx) Waterproof: IP68
Traffic Control Equipment. Traffic-control equipment marks boundaries, creates barriers, and provides direction for managing traffic on roads and inside facilities. These traffic safety products help prevent collisions and traffic backups. Barrier tapes and pavement markers identify closed off areas, traffic lanes, survey sites, and more.
Item No.: SRS01200A-GPSSE, GPS controlled Synchronous Flashing Solar Road Markers. Size： Φ200mm X 25mm 1. High quality Li-on battery, longer life, over 8 years 2. Perfect water proof, IP 68 3. Can stand snow plough, only 3.5mm over the road surface
